wholesale stainless steel jewelry manufacturer
5 thoughts on “wholesale stainless steel jewelry manufacturer”
Leave a Comment
You must be logged in to post a comment.
wholesale stainless steel jewelry manufacturer
You must be logged in to post a comment.
cheap wholesale jewelry india Preparation tools: Passing pendant pendants, lanyard, scissors, lighters
Specific steps:
1, first bake the rope with a lighter, then use your hand to grill the hot place of the shredded place Skin, you can pass through the cave of the pendant.
2, and then pass through the hole of the pendant together with both ends of the rope.
3, leave an appropriate length of the binding length of 1cm according to personal circumstances.
4. Open the end of the rope and go around the other side.
5, go around the other side to fight.
6, reverse knot again.
7.
8, the end lighter is treated.
This information:
The maintenance precautions for jade pendants:
1. Avoid collision with hard objects. The jade parts are easy to crack after the collision. Sometimes although the naked eye does not see the cracks, in fact, there are dark cracks in the jade surface, which greatly damages its perfectness and economic value.
2. Jade should avoid sunlight. Prevent the texture and color of jade.
3. Avoid chemical agents, chemicals will bring certain damage to jade, such as various detergents, soaps, insecticides, cosmetics, perfumes, and hairdressing agents. If you are not careful, clean it in time and clean it in time. Do not let it cause damage to the jade.
4. Avoid dust and oil as much as possible. If dirt or oil stains are attached to the jade surface, it should be washed with light soapy water, and then rinsed with water. Do not use chemical oil removal agents.
5. New jade pieces should generally be soaked in water for a few hours, clean with a soft brush (toothbrush), and then dry them with a clean cotton cloth.
6. It is best to wipe it with a clean and soft white cloth, and it is not advisable to use staining cloth and fibrous hard fabrics to help maintain and maintain the original quality.
7. Wash regularly. Jade pieces are generally cleaned every other time.
8. Suspendes such as Yu Pei should regularly check the rope to prevent lost or damaged treasures.
patrice jewelry wholesale Summary: First use the fine rope to pass through the pendant, and then knot the thin rope. Then fold the two lines of the thin line and cross each other. Weave a thicker part.
1, first use the thin rope to cross the pendant, and then knot the thin rope.
2, then fold the two lines of the thin line to cross each other.
3, woven into a thicker part.
4.
If Note:
This pendant is generally a relatively special shape, and then connects with a rope or metal chain. The rope is not easy to hurt the neck, but it is easy to break for a long time.
The metal rope is better with stainless steel or silver. Both materials have no side effects on the skin, especially catering to Europeans and Americans. But the metal is harder. If it is a bad process, it will easily hurt the neck.
The pendant style on the market is many, and there are many materials, but European and American, Japanese and South Korean is popular in stainless steel. The environmental protection of stainless steel is better and safer. It is best to choose 316L in material.
wholesale african jewelry Pay content for time limit to check for freenAnswer 1.nPrepare a long red pendant rope, fold it into two stories, and knots at 1 cm in the middle point.n2.nThen wrap the two ropes to each other to knot each other, and use scissors to reduce the extra part of the tail.n3..nHold the end of the pendant rope, wear a hole jade, put the jade into the rope, and place the jade in the middle of the rope; hold the ends of the rope to make the jade vertical pull in the middle of the jade.n4 Hold the ends of the rope to pull the jade vertical rope, and then tie the rope to tie the jade.nDon't make jade look tight, it will make people look dull.n6 The knot of the rope is burned with a lighter. When the connector is melted, the fire will be extinguished, blowing the connector, and pinching the joints with your hands to make the connector cannot be seen.nWhat else can help you?nMore 8nBleak
chaps jewelry wholesale The specific steps of the pendant knotting method are as follows:
Pre -preparation tools: with perforated pendant pendants, lanyard, scissors, lighters
1 fire baked rope, pumping while hot, can make it pass through the hole through the hole Essence
2 Pass through the pendant hole together.
3 Leaves the length of an appropriate length as 1cm depending on personal hobbies.
4 Open the end of the rope and go around the other side.
5 to the other side to fight.
6 reverse knot again.
7 is so on, until the length of the rope head is left.
8 The end of the lighter is treated.
wholesale jewelry with tax id Method of the pendant rope: Come and learn by girls
n Shortcut keys to describe space: Play/ pause ESC: Exit full screen ↑: increased by 10% ↓: A amount of volume decreases 10% →: Single fast forward 5 seconds ←: Press 5 seconds in a single fast retreat. You can re -open the small window in the player settings and play the error, please refresh your try